Mechanical Project Engineer (374017) - Cork based A site-based Project Engineering secondment role. The candidate should have a process or mechanical qualification with an experience in demolition projects. The candidate will be expected to lead a client team and coordinate a design team to deliver this project. Leadership experience in process and mechanical systems is essential with a strong safety awareness . A broad experience in delivering projects with a safety, commercial, technical and quality adherence knowledge is essential on a Pharma site. Key Responsibilities Lead client-side project engineering activities on site. Coordinate a multidisciplinary design team and drive project delivery. Oversee demolition scopes with strong focus on safety and compliance. Provide technical leadership in process and mechanical systems. Ensure all project work meets safety, quality, technical, and commercial standards. Requirements Degree inProcess orMechanical Engineering. Demonstrated experience in demolition project delivery. Strong leadership skills with ability to manage client teams and engineering contractors. High safety awareness and experience working on Pharma sites. Proven capability managing projects in complex, regulated environments.
Scheme Project Manager -Dublin based - Hybrid - € neg - 6 month contract. Support the Lead in project management, coordination and setup of the transport Scheme to take the project through the Planning Re-submission to ACP (Board) Planning Approvals and post Board approval workstreams. These roles will continue through the tender, procurement phase and provide continuity with an eventual site team. Project Manager/ Delivery Manager Project management to deliver the Scheme A strong project coordinator Design management, multi-disciplinary coordination Resource planning and management Project proposal and scoping Schedule creation and management Risk management Cross workstream interface management Client liaison and stakeholder engagement Preferable experience: Technical delivery of roads projects and preferably urban schemes Consultation, responses and key decisions to inform design and project delivery Progress project through planning phase and ACP (Board) approvals Compulsory Purchase Order (CPO) process Co-ordinating Environmental and Traffic inputs (EIA and TIA) Desirable Skills: Strong team leadership skills with an ability to influence to drive effective decision making; Ability to deal with and resolve unforeseen risks and issues; Ability to prioritise effectively, meet deadlines and deliver consistent service; Ability to manage client expectations and deliver within agreed parameters; and Ability to work in a challenging environment both on their own initiative and as part of a team.
HSE Advisor (374079)- Limerick based - c.€60.00 per hour HSE Advisor required immediately - Minimum 5 years Experience in Life Sciences or Advanced Manufacturing. Coordinate and manage permit-to-work systems for construction activities in a live environment Support the safe execution of construction projects through effective HSE deliverables Assist the Project HSE Manager/ HSE Director in implementing the Project HSE Program and ensuring legal and regulatory compliance Develop and implement project-specific HSE plans in line with statutory requirements and international standards (e.g. ISO 45001, ISO 14001) Review Contractor safe systems of work, Risk assessments and Method Statements. (RAMS) Implement corporate HSE management programs through project standards and procedures Assist with incident investigations, including root cause analysis and implementation of corrective actions Prepare and issue HSE reports for internal and external stakeholders Monitor HSE performance through inspections, audits, and reporting Contribute to HSE performance initiatives, plans, and continuous improvement activities Develop and deliver site inductions and HSE training programs Support wellbeing initiatives, including Wellbeing and Beyond Zero programs Plan and deliver HSE promotional campaigns and events, such as Safety Week
CSA Construction Supervisor (374014)- Cork based - c€63.00 per hour A site based Construction Supervision secondment role in the Cork region. The candidate should have a mechanical qualification with a strong technical knowledge and experience in supervising mechanical and piping projects on an API facility. Experience in construction supervision with a commercial, technical and quality adherence knowledge is essential Responsible To Construction Manager Brief Description of the Job and Summary of Responsibilities The CSA Construction Supervisor is assigned to a project as a senior member of the Construction Team with responsibility for the proper and timely construction of the CSA Scope in accordance with approved best Safety and Quality standards, the detailed design, the control estimate, contract, SOPs, WIs, standards etc. Pre-Construction duties/ responsibilities will involve: Detailed review and liaison with design and client workgroup leads, model reviews. Prepare and lead constructability reviews across every facet of the build. Prepare detailed SOWs for trade contract procurement. Assist in preparation of detailed BOQs. Review returned CSA bids and prepare TBA. Trade and industry knowledge reviews, keeping abreast of developments in the construction industry . Development of detailed execution strategies. Input into CHSP, QA/TO and all other General Construction Requirement documentation. Assist in schedule development, schedule reviews and lead IAPs . Qualifications Degree qualified in Civil or Structural Engineering . Significant years experience in a similar role Biotech / Pharma knowledge Excellent multi-disciplinary knowledge Excellent communication skills People management skills
E&I Project Engineer (374010)- Cork based c.€63.00 per hour A site based Project Engineering / design secondment role in the Cork region. The candidate should have an Electrical or I&C qualification with a strong technical knowledge and experience in designing and vendor engagement on an API facility. Experience in medium sized projects with a knowledge of electrical and instrumentation systems, technical understanding and quality adherence on API sites. The ideal candidate would have 10+ years experience in Pharmaceutical electrical design and project delivery. They should be available to come to site daily. They would be familiar with Pharma culture, Industry standard technology, good electrical design principals and familiar with generation of electrical design deliverables. They would also be proficient in vendor engagement and management of electrical upgrade projects.
Electrical Project Engineer (374009)- Cork based c.€60.00 per hour A site based Project Engineering (E&I) secondment role in the Cork region. The candidate should have an electrical qualification with a strong technical knowledge and experience of delivering E&I projects on a bio and API facility. A broad experience in delivering multiple medium sized projects with a commercial, technical and quality adherence knowledge is essential. The ideal candidate would have 10+ years experience in Pharmaceutical electrical design and project delivery. They should be available to come to site daily. They would be familiar with Pharma culture, Industry standard technology, good electrical design principals and familiar with generation of electrical design deliverables. They would also be proficient in vendor engagement and management of electrical upgrade projects.
Process Engineer (374015)- Cork based - c.€60.00 per hour. A site-based Project Engineering (Process) secondment role on a Cork site. The candidate should have a process or mechanical qualification with a strong experience in delivering New Product or Tech Transfer projects. The candidate will be expected to lead a client team and coordinate a design team to deliver this project. Leadership experience in process and mechanical systems is essential. A broad experience in delivering multiple projects with a commercial, technical and quality adherence knowledge is essential. The successful candidate must have strong leadership and planning qualities, be adaptable to change and be comfortable working cross functional design and production teams delivering to strict deadlines and budgets. Pharmaceutical process knowledge, equipment specification development and understanding of validation is required. KEY TASKS AND RESPONSIBILITIES Participating in the Process Design for Life Science projects for the introduction of new products, equipment, and processes to meet all safety, quality, regulatory and operational requirements. Supporting Process development (as part of technical transfer), troubleshooting and optimisation. Development of process estimates, including equipment costs. Working with a cross functional Design team to ensure accurate completion of Detailed Design, on time and on budget Working with a cross functional team as part of project planning and deployment; including collaboration with supporting departments such as Technical Development, Production/Operations, Quality, Safety, Facilities and Engineering. Process mapping, gap analysis/identification for new and existing pharmaceutical manufacturing processes. Equipment specification, process design, commissioning (if required) and as building Development and Management of the Change Control for the Project Other Functional Responsibilities Co-ordinating design changes using the Client approved change control procedure to ensure that cGMP is adhered to. Generation, review and approval of project documentation (Scope, User Requirement Specifications etc) Supervision of Junior Process Engineers if specific project requires additional support Support validation activities for project activities including review of validation documentation and attendance at validation activities as required (FAT, IQ, OQ etc). To ensure that all new equipment is bought in accordance with appropriate site procedures & regulations. To provide technical support to system end users of new and existing equipment including but not limited to troubleshooting technical issues and assisting with process investigations. To facilitate and participate in meetings and workshops as part of Projects and Continuous Improvement activities. Hazop attendance and management of the closeout of the Hazop Recommendations Update existing Hazardous Area reports for Equipment/Process Provide technical updates to Standard Operating Procedures (SOPs) related to the equipment/process changes To adhere fully to all safety policies, procedures and regulations. To participate in all training and assessment activities related to the role. To perform all activities in accordance with current Good Manufacturing Practice. To record and report any Process changes relating to the projects, which could impact budget and schedule To create, review and approve Site Engineering Specifications and other documents as required, ensuring the acceptability of content and format. SKILLS, EXPERIENCE AND QUALIFICATIONS Required Skills: B.Eng in Chemical and Processing Engineering or appropriate science or engineering discipline. A minimum of 8+ years recent relevant experience in a process engineering role in the Pharma/Chemical/Biotech industry. Secondary Pharmaceutical Manufacturing Process understanding and experience e.g. fill lines. A proven track record in process design, development, support and improvement is required. A good understanding of ATEX and Hazardous Area Zoning The ability to organise, plan and execute multiple tasks to tight schedules Additional Skills Flexibility and ability to adapt to changing priorities is required. Proven track record of process-based activities in the pharmaceutical industry. Experience with process technologies. Experience with process equipment procurement. Good communication skills combined with an imaginative and creative approach to problem solving. Strong leadership skills and the ability to work in cross-functional team environments, as well as independently.
Lead Electrical Engineer - Dublin based - Hybrid. - C. €65.00 per hour Key Activities Creation and modification of specifications, drawings, datasheets and schedules to support the electrical engineering design activities described below: Specification, procurement, installation, testing and commissioning of MV & LV Switchgear, Conventional and Intelligent Motor Control Centres, VSDs, Transformers, UPS Systems, Generators, Power Factor Correction Equipment etc. MV and LV Power system design. Electrical design required to support industrial facilities Executing projects in a multi-discipline 3D design environment Power systems & equipment, short circuit calculations & analysis and co-ordination/discrimination studies. Design of electrical facilities to IS, EN and IEC standards including Power, Lighting, Cabling, Cable Containment Systems, Cat 6 Structured Wiring, Fire Alarm, Earthing, Lightning Protection etc. Familiar with the Design Workflow for Inter-discipline activities Process / Piping / Mechanical Packages / 3D model. Qualifications & Experience Degree Chartered an advantage Pharma experience a huge advantage. Will also consider Commercial experience At least 10-15 years as Electrical Engineer. Delivery of Electrical Engineering Design to meet budget, schedule and quality requirements Worked on large projects Position requires thorough knowledge of electrical design and engineering techniques. Deep knowledge of ETCI Wiring Regulations, IEC Standards and EN Standards. Experience in working as part of a team in schedule driven multiple discipline projects. Very good proactive communicator.
Structural Revit Designer - Dublin based - Hybrid. C. €65.00 per hour Working with the wider in house BIM team you will be responsible for the generation of and input to structural Revit models for projects as well as the generation of 2D drawings. As part of your roles and responsibilities you will be required to: Generate and develop structural models for projects Work with the structural design team to develop a design basis and model for projects Coordinate the structural design with other in house design disciplines, including architecture, mechanical and piping teams Coordinate drawing development with engineers and designers Generate 2D design drawings from the structural model This is an excellent opportunity to work on Life Science Projects with an inhouse design team. You will be joining an existing team of Structural designers and engineers where we strive to develop a culture of team work and support
Intermediate Structural Engineer - Dublin based - Hybrid. C. €65.00 per hour General Summary As an intermediate structural engineer you will be required to work within the structural team under the direction of a lead engineer. Duties may include undertaking design calculations and reports, attending internal design team meetings, attendance at client review meetings, checking structural drawings, etc. Overall Expectations: Be able to produce structural design calculations and reports for specific elements of the project Work with the structural team to assist with the development of the 3d Revit model, and then be able to review and check drawings Actively cooperate with members of your project task force, client personnel and members of your department, as appropriate Understand client expectations, as determined by the team, and constantly strive to achieve or better these Meet commitments that you make to the client, individually or as a team, to complete work by certain dates or within agreed man-hour or cost budgets Qualifications Degree in Civil / Structural Engineering Chartered engineer Preferable Technically proficient with Eurocode, BSI and Irish design standards and codes Proficient with structural design softwares (TEKLA Designer, etc) Excellent communications skills 5years+ experience in the design of building structures
